Invacare Ultra-Light Neo Bedienungsanleitung Seite 36

Height-adjustable push handles, mounted back
Thanks to its height adjustability, this option enables your
companion to push the wheelchair comfortably. Because
GB
the push handles are set backwards, the user's shoulders
will benefit from more freedom of movement. This is
important for the mobility and independance of the user.
Height adjustment
Loosen the locking handle, adjust the push handles to the
desired height and tighten the locking handle firmly.
Swivel and height adjustable armrests
Swivel
Slightly raise the back of the armrest and swivel it to the required position
or, if necessary, pull upwards to remove it.
Height adjustment
Remove the armrest (pull it out of the retaining
sleeve). Slacken the screw on the underside of the
armrest tube (4mm Allen key) and move the bolts
inside the tube to the desired height. Fit and re-
tighten the screws in the next available hole.
Swing-back and removable siderests
Swing-back: Press the side release buton, and swing
back the side rest. To bring it back into locked position,
swing the side rest forwards until it engages.
Removal: Press the release button. Swing the armrest
backwards and remove it. To replace, insert into back
socket, swing the armrest forwards until it engages.
Height adjustable, swing-back and removable siderests
Height adjustment: Pull the release lever. Move the
armrest to the desired position. Press the release lever
and slightly raise the upholstery until it engages.
Swing-back: Press the side release buton, and swing
back the side rest. To bring it back into locked position,
swing the side rest forwards until it engages.
Removal: Press the release button. Swing the armrest
back and remove it. To replace, insert into back socket,
swing forwards until it engages.
Make sure that the armrest is locked into position.
36
Vis six pans