Accessories - Invacare Ultra-Light Neo Bedienungsanleitung

Accessories

Backrest angle adjustment
Slide the bottom of the backrest upwards on the
backrest tube - 2 hexagon socket screws will
appear. Unscrew the bottom one completely (5mm
Allen key). The backrest angle can be set in one of
4 positions: 0°, 3°, 8° and 12°. Select the corres-
ponding hole, replace the screw and tighten again.
CAUTION: The position of the screws must
be identical on both sides.
If the backrest is set backwards,
the wheelchair is less stable. !
Upholstered Velcro-adjustable back
Thanks to this Velcro system, you can decide on the
firmness of the backrest and adjust the comfort of the
wheelchair according to your needs: remove the padded
upholstery, loosen the Velcro bands at the back of the
backrest by simply pulling them apart. You can then
adjust them in the new desired position, to suit your back.
Folding hand grips
At the top of the backrest tube, just before the bend
on the hand grip, there is a metal sleeve. To collapse
the hand grip slide this sleeve upwards. If you wish
to replace the sliding hand grip in the vertical posi-
tion, lift the grip and slide the sleeve downwards.
CAUTION : This folding hand grip is not designed
to overcome obstacles.
Hinge Fulcrum
Point
d'articulation
Angle position
Position de
for 3° and 12°
réglage 3°
Angle position
Position de
réglage 0° + 8°
for 0° and 8°
Bague
Metal
Sleve
Poignée
Hand grip
GB
35