Communication; Rs232 Menu - OHAUS Defender 6000 Bedienungsanleitung

EN-36
[ ]
P.ID
Project ID
Set the Project identification number.
To set the number, short press the No button several times until the desired number appears. Short press
the Yes button to accept the number and move to the next digit. Repeat the process until all the digits are
correct. Press the Yes button to accept the value.
For i-DT61XWE model, you can input the Project ID through the numeric keyboard.
[ ]
S.ID
Scale ID
Set the scale identification.
Please refer to the Porject ID section about how to set the number.
For i-DT61XWE model, you can input the Scale ID through the numeric keyboard.
[ ]
End
End
Advance to the next menu or return to the top of the current menu.
4.7

Communication

Enter this menu to define external communication methods and to set printing parameters.
Data may be output to either a printer or PC.
Factory default settings are shown in bold.

4.7.1 RS232 Menu

Enter this menu to define communication parameters.
Note： 2 nd RS232 is only available for i-DT61XWE model.
Menu Sub-Menu
Baud Rate
Parity
RS232
Stop Bit
( r.S.2.3.2 )/
2nd SERIAL
Handshake
PORT
Alt Print CMD
( 2.S.E.r.I.A)
Alt Tare CMD
Alt Zero CMD
Reset
End
[ ]
reset
Reset
Reset the RS232 menu to factory defaults.
NO
= do not reset.
YES
= reset
[
BAUd
Baud Rate
Set the baud rate (bits per second).
300 = 300 bps
600 = 600 bps
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
38400 = 38400 bps
57600 = 57600 bps
Sub-Menu
(in segment)
BAUd
PArItY
StOP
H.SHAKE
ALt.P
ALt.t
ALt.Z
reset
End
]
Options
300, 600, 1200, 2400, 4800,
9600, 19200,38400, 57600
7 Even, 7 Odd, 7 None, 8
None
1 bit, 2 bit
None, Xon/Xoff
'A' ~ 'Z', P
'A' ~ 'Z', T
'A' ~ 'Z', Z
\
\
Defender 6000 Indicators
Options (in segment)
/
7 EuEN, 7 Odd, 7 NONe,
8 NONE
/
NONe, ONOFF
/
/
/
/
/