Button Navigation - OHAUS Defender 6000 Bedienungsanleitung

Defender 6000 Indicators
 Zero Range setting is locked at 2%.
 Stable Range setting is locked at 1d.
 Auto-Zero Tracking setting is locked at 0.5d.
 Filter and Units are locked at their current settings.
 Stable Only is locked to be On.
 Auto Print/Continuous is disabled.
;
 Lb oz unit is locked Off.

4.1.2 Button Navigation

The Yes button：
The No button：
The Back button:
The Exit button:
For menu items with numeric settings such as Capacity, the current setting is
displayed with all digits flashing. To revise:
Press the No button to begin editing.
1.
2. The first digit is displayed flashing.
3. Press the No button to increase the digit or press the
Yes button to accept the digit and move to the next
one.
4. Repeat this process for all digits.
5. Press the Yes button when the last digit has been set.
6. The new setting is displayed with all digits flashing.
Press the Yes button to accept the setting or press the
No button to resume editing.
7. To end the current menu selection, press the Yes
button to advance to the next menu, or press the No
button to return to the top of the current menu.
Note: For i-DT61XWE model, the numeric value can be input by the numeric keypad directly.
allows entry into the displayed menu.
Accepts the displayed setting and advances to the next item.
rejects entry into the displayed menu.
Rejects the displayed menu and move on to the next selection.
moves backwards through the upper and middle level menus.
Backs out of a list of selectable items to the previous middle level menu.
exits from menu directly to the active weighing mode.
EN-25