Light [L.i.g.h.t]; Unit [U.n.i.t] - OHAUS Valor 1000 -Serie Bedienungsanleitung

EN-10
- After the scale shows
weight) will be shown in the screen. Place weight(s) of shown value and
press Yes.
- The scale shows
will be shown in the screen. Place weight(s) of shown value and press
Yes.
- The scale shows
successfully, the scale displays
automatically.
If incorrect calibration masses are used, the scale displays
user menu automatically.
To abort calibration at any point, press No.
End
End [ ]
Press Yes to move to the next Menu, or press No to return to Span calibration.
L.I.G.H.t
4.2 Light
[
This sets the operation of the display's backlight.
ON = always on
OFF = always off
AUTO = Turns on when a button is pressed or the displayed weight changes.
Alternatively, turns off the backlight when the displayed weight does not change for
more than 10 seconds.
U.N.I.t
4.3 Unit
[
The Valor 1000 allows one weighing unit to be used at a time. Units can be
changed in this menu. Availabel units vary for different regions or models.
Unit
Gram
Kilogram
Pound
Ounce
Pound:Ounce
Press Yes to enter the Unit menu. The currenly used weighing unit will be shown.
To change the unit, press No to move to the next unit.
Press Yes to set the displayed unit to the weighing unit and exit the Unit menu.
--C--
--C--
, then the calibration mass value (a span weight)
--C--
. Once the linearity calibration is completed
]
]
Display
g
kg
lb
oz
lb:oz
, the calibration mass value (a Midpoint
Done
and exits the user menu
TM
Valor 1000 Series
Cal E
and exits the