Finish Operation; Maintenance And Care - Kärcher SDP 14000 Level Sensor Betriebsanleitung

Flat suction (only SCP 12000)
In flat suction mode, the fluids can be
sucked off up to 1 mm of residual height.
 Fold in the folding feet
 When the height of the remaining fluid
is less than 20 mm, press the deaera-
tion key or plug in and disconnect the
pump many times till the fluid is sucked
in.

Finish operation

 Rinse the pump with clean water after
use.
Especially after running chlorinated wa-
ter or other liquids that leave residue
behind.
Note:
Contaminations can accumulate and lead
to malfunctions.
 Disconnect the main plug from the
socket.

Maintenance and Care

Maintenance
The appliance is maintenance-free.
In order to ensure a reliable switching of the
pump, the level sensor should be cleaned
with a cloth (at least every 2 months).
Storage
 Store the appliance in a frost free area.
CE declaration
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Product: Pump
Type: 1.645-xxx
Relevant EU Directives
2006/95/EC
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006
EN 55014–2: 1997 + A1: 2001
EN 60335–1
EN 60335–2–41
EN 61000–3–2: 2006 + A2: 2009
EN 61000–3–3: 2008
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Head of Approbation
CEO
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
English 15