Operating Modes; Disposal And Environmental Protection - Bosch Rexroth SMdev Bedienungsanleitung

14/40 Bosch Rexroth AG

6 Disposal and Environmental Protection

5.4 Switching on
Upon delivery, the SMdev is set to start with
MAC ID 63 and a 125 kbit/s data transfer
rate. The operating state can be displayed via
the diagnosis in the BS300 via System test
→ DeviceNet.
5.5 EDS file (Electronic Data
Sheet)
The EDS file corresponding to the DeviceNet
module can be generated with the BS300
(System → Tightening channel configuration)
once the module has been configured.
5.6

Operating modes

The "polling" and "change of state" operating
modes are supported.
SMdev | 3 609 929 A77/06.02
6 Disposal and Environ-
mental Protection
6.1 Disposal
Disposal
At no cost to you, you can dispose of any pro-
ducts we have manufactured simply by retur-
ning them to us. Please note that the
products must be completely free of oils, fats,
or other contaminants, otherwise we cannot
accept them.
Additionally, returned products must not con-
tain any inappropriate foreign matter or
unknown components.
Please return products to the following
address free domicile:
Bosch Rexroth
Electric Drives and Controls GmbH
Schraub- und Einpress-Systeme
Fornsbacherstr. 92
71540 Murrhardt, Germany
Packaging
Packaging is made of cardboard, wood, and
polystyrene. These materials can be recycled
without any problem at any recycling site.
Due to ecological considerations, please re-
frain from returning empty packaging to us.