Checchi & Magli TRIUM Bedienungs- Und Wartungsanleitung Seite 48

Information and safety signs
WARNING
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
M
UN41-0617IN
A) Hazard plate: read the use and maintenance manual
before using the work vehicle.
B) Hazard plate: do not remain on the seat with the
work vehicle lifted off the ground.
C) Hazard plate: switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
D) Information plate: strap up at the anchor points
shown to lift the work vehicle.
E) Hazard plate: this highlights a risk of hands being
crushed between the dispenser and the dispenser
disc.
English language
TECHNICAL INFORMATION
A B
L
6
The illustration shows the locations and meanings of the
safety signs.
C
G
H
F) Information plate: lubricate the chain inside the
casing to which the plate is affixed.
G) Plant spacing plate (standard): this shows the type
of pinion to fit according to the plant spacing re-
quired.
H) Plant spacing plate (option ): this shows the type of
pinion to fit according to the plant spacing required.
L) Information plate: this shows the greasing points.
M) Information plate: this indicates rotation of the part
to which the plate is applied, showing the direction
required to achieve the desired effect.
2
D
E
F
Use and maintenance