Using The Power Adapter; Getting Started And Operation; Setting Up The Telescopic Aerial (12); Switching The Digital Radio On And Off - Silvercrest SDR 1.5 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SDR 1.5 A1

8.2 Using the power adapter

In order to power the device with a USB power adapter (5 V
supplied), connect the USB cable (C) supplied to the micro USB connection (13) on
the digital radio and a free USB port on your USB power adapter.
If the digital radio is disconnected from the power, various
settings (e.g. date and time) are lost. You can insert additional
batteries to prevent this. Batteries cannot be recharged in the
digital radio.

9. Getting started and operation

9.1 Setting up the telescopic aerial (12)

To guarantee optimum radio reception, extend the telescopic aerial (12) to its full
length. The telescopic aerial (12) can be rotated. This lets you optimise the radio
reception.

9.2 Switching the digital radio on and off

Press the button (5) briefly to switch on or off the digital radio.
When you first start it, the digital radio starts up in DAB mode
and automatically scans for and saves all available DAB
stations.
In battery mode, the display (3) shows the charge level of the
batteries with a battery icon. Replace the batteries when they
are empty.
In battery mode, the display backlight switches off after approx.
30 seconds (factory-default setting) if no buttons are pressed.
When the device is switched off, press the any button (except
the
(3).
46 - English
button (5)) to show the date and time on the display
, 500 mA, not