Fm Radio; Scan Setting; Automatic Tuning; Manual Tuning - Silvercrest SDR 1.5 A1 Bedienungsanleitung Und Sicherheitshinweise

9.11 FM radio

The following options are available in "FM Radio" mode.

9.11.1 Scan setting

This option in the FM Radio menu lets you choose if the device scans for "strong"
stations only or also for "weak" stations.
 Press and hold the INFO / MENU button (2) for approx. 2 seconds.
 Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Scan setting" option.
 Press the OK / AMS button (8) briefly.
 Use the I◂◂ (6) and ▸▸I (7) buttons to select "All stations" or "Strong stations
only" and confirm your selection by pressing the OK / AMS button (8) briefly.

9.11.2 Automatic tuning

Start automatic tuning by pressing the OK / AMS button (8) and holding it down
for about 2 seconds. With this function, any stations found are saved automatically.
The unit only scans for DAB or for FM stations, depending on
the mode selected.

9.11.3 Manual tuning

This function allows you to search for a station without automatically saving it.
 Press and hold the I◂◂ (6) or ▸▸I (7) button for approx. 2 seconds to launch the
station scan in the selected direction. The search stops at the next station found.

9.11.4 Manually tuning a station

As an alternative to station search, you can also tune stations manually. This makes
it possible to find even weaker stations. To do so, proceed as follows:
SilverCrest SDR 1.5 A1
English - 51