9.12.1 Setting the alarm
This menu allows you to set two alarm times. Make sure the time is set correctly.
Press and hold the INFO / MENU button (2) for approx. 2 seconds.
Use the I◂◂ (6) and ▸▸I (7) buttons to select the "System" option.
Press the OK / AMS button (8) briefly.
In the System menu, use the I◂◂ (6) and ▸▸I (7) buttons to select the "Alarm"
option.
Press the OK / AMS button (8) briefly.
Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Alarm 1" or "Alarm 2" option.
Press the OK / AMS button (8) briefly.
The hour display flashes and you can now use the I◂◂ (6) and ▸▸I (7) buttons to
set the hour of your alarm time. You can keep the buttons pressed to accelerate
the digits count. Press the OK/ AMS button (8) briefly to apply the setting.
The minute display flashes and you can now use the I◂◂ (6) and ▸▸I (7) buttons
to set the minutes of your alarm time. You can keep the buttons pressed to
accelerate the digits count. Press the OK/ AMS button (8) briefly to apply the
setting.
You can now set how long the alarm will sound by pressing the I◂◂ (6) and ▸▸I
buttons (7). The following options are available: "15 minutes", "30 Minutes",
"45 Minutes", "60 Minutes" and "90 Minutes". Press the OK/ AMS button (8)
briefly to apply the setting.
You can now use the I◂◂ (6) and ▸▸I (7) buttons to select "DAB", "FM" or
"Buzzer" for your alarm. Press the OK / AMS button (8) briefly to confirm your
selection.
SilverCrest SDR 1.5 A1
English - 53