Press the OK / AMS button (8) briefly.
Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Set 12/24 hour" option.
Press the OK / AMS button (8) briefly.
Using the I◂◂ (6) and ▸▸I (7) buttons, select "Set 24 hour" or "Set 12 hour" and
confirm your selection by pressing the OK / AMS button (8) briefly.
If you select the 12 hour format, the display (3) shows "AM"
before the time in the morning or "PM" in the afternoon.
9.12.5 Setting the date format
To set the date format, proceed as follows:
Press and hold the INFO / MENU button (2) for approx. 2 seconds.
Use the I◂◂ (6) and ▸▸I (7) buttons to select the "System" option.
Press the OK / AMS button (8) briefly.
In the System menu, use the I◂◂ (6) and ▸▸I (7) buttons to select the "Time"
option.
Press the OK / AMS button (8) briefly.
Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Set date format" option.
Press the OK / AMS button (8) briefly.
Use the I◂◂ (6) and ▸▸I (7) buttons to select "DD-MM-YYYY" or "MM-DD-YYYY"
and confirm your selection by pressing the OK / AMS button (8) briefly.
9.12.6 Setting the display brightness
To adjust the display brightness, proceed as follows:
Press and hold the INFO / MENU button (2) for approx. 2 seconds.
Use the I◂◂ (6) and ▸▸I (7) buttons to select the "System" option.
SilverCrest SDR 1.5 A1
English - 57