Recalling A Station; Audio Setting; Settings - Silvercrest SDR 1.5 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SDR 1.5 A1
 Press the FAV / SEARCH button (11) briefly.
 Briefly press the I◂◂ (6) or ▸▸I (7) button to increase or reduce the frequency one
step (0.05 MHz).

9.11.5 Recalling a station

You can recall stations from the favourites list (see chapter 9.8 for stations sorting)
as follows:
 Use the I◂◂ (6) and ▸▸I (7) buttons to toggle between the stations.

9.11.6 Audio setting

You can set the playback in FM Radio mode to "Stereo" or "Mono". Please note
that stereo sound is only available if headphones are connected.
 Press and hold the INFO / MENU button (2) for approx. 2 seconds.
 Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Audio setting" option.
 Press the OK / AMS button (8) briefly.
 Use the I◂◂ (6) and ▸▸I (7) buttons to select "Stereo" or "Mono" and confirm
your selection by pressing the OK / AMS button (8) briefly.
Change the setting to "Mono" to reduce noise on weak
stations.

9.12 Settings

The System menu allows you to configure further settings. Press and hold the INFO
/ MENU button (2) for approx. 2 seconds to enter the menu. Within the menu, you
can navigate with the I◂◂ (6) and ▸▸I (7) buttons. Press the OK / AMS button (8)
briefly to confirm your selection. To go back one step in the menu, press the INFO /
MENU button (2) briefly.
52 - English