The device is part of the Parkside
X 12 V TEAM and X 20 V TEAM series
and can be operated using Parkside
X 12 V TEAM or X 20 V TEAM series
batteries. The batteries may only be char-
ged using chargers from the Parkside
X 12 V TEAM or X 20 V TEAM series.
General description
The illustrations can be found
on the fold-out pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete.
-
Cordless LED Worklight
-
Instruction Manual
-
12V adapter
-
Power plug
Battery and charger
are not included.
Dispose of the packaging material correctly
Functional description
The battery-powered LED flood lamp has
a swivelling head and there are several
options for placing or hanging it.
The device can also be operated without
battery using the charger/power adapter.
Refer to the following descriptions for a
functional description of the controls.
Overview
1
Switch
2
On/Off switch
3
Handle
4
Adjusting screw
5
Hook
6
Recess
7
Latch
8
12 V adapter
9
Power plug
10 Plug
11 Release buttons
12 Battery
13 Power connection
14 Guide
15 Keyhole bore
16 Internal thread
Technical data
Cordless LED Worklight ........PLSA 20-Li A1
Nominal voltage
U
............................................ 20 V
1
U
............................................ 12 V
2
U
.................................. 18 V
3
Rated output P
........................... 20 W
max
Number of lamps (LED) .............20 x 1 W
Light output....................... max. 2000 lm
Light colour ........... Daylight white 5700K
Lighting duration in battery operation:
20 V/2 Ah .................................. 85 min
20 V/4 Ah ................................ 170 min
12 V/2 Ah .................................. 50 min
12 V/4 Ah ................................ 100 min
Internal thread .....................
Protection class ............................... III
Protection category ........................ IP20
GB
IE
; 1,5 A
/
/
" and
"
1
5
4
8
III
15