Safety Instructions; Symbols And Icons - Parkside PLSA 20-Li A1 Originalbetriebsanleitung

GB IE
Charger (power adapter) JLH341801500G
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
HRA: 5468, Amtsgericht Aschaffenburg
Input voltage ....................... 100-240 V~;
Input A C f requency ............... .50-60 Hz
Power input ...................................50 W
Rated output ............................ 18.0 V
Output current ............................... 1.5 A
Output power ............................. 27.0 W
Average active efficiency ..............88.3 %
Efficiency at low load (10%) ..........83.7 %
Power consumption at zero load ...0.08 W
Protection class .................................
Protection category ........................ IP20
Temperature ...........................max. 90°C
Attention!
An up-to-date list of battery
compatibility can be found
at: www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
The following batteries can also be used
with the 12 V adapter: PAPK 12 A1,
PAPK 12 A2, PAPK 12 B1, PAPK 12 B2.
The listed 20 V batteries may be charged
with the following chargers:
PLG 20 A1, PLG 20 A3, PDSLG 20 A1.
PLG 20 A1 PLG 20 A3
Charging
time (min.)
PAP 20 A1
PAP 20 A2
PAP 20 A3
16
PDSLG 20 A1
60 30
75 30
90 60
The listed 12 V batteries may be charged
with the following chargers:
PLGK 12 A1, PLGK 12 A2, PLGK 12 B2.
Charging
time (h)
PLGK 12 A1
PLGK 12 A2
PLGK 12 B2

Safety instructions

Symbols and icons

Symbols on the appliance
On/Off switch
II
Level 1
Level 2
Flashing mode
Changing the illumination
mode
Warning! Do not look
into the light source!
Electrical appliances must not
be disposed of with the do-
mestic waste.
Protection class III
III
Direct voltage
PAPK 12 A1 PAPK 12 B1
PAPK 12 A2 PAPK 12 B2
1
1
0,5
2
2
1