Intended Use; Specifications Supplied; Description Of Parts; Technical Data - Parkside PAS 1500 LM A1 Bedienungs- Und Sicherheitshinweise

With the CE label, the
manufacturer confirms that this
electrical device complies with
the applicable European
directives�
z Intended use
This floodlight is suitable for rugged use
indoors and outdoors. The floodlight is not
intended for use as a hand-held lamp� The
handle is intended for moving the position of
the floodlight. The floodlight must not be
connected to the power supply while it is
being moved� The lamp can withstand
extremely high levels of physical stress in the
form of shocks (1 m²/s³, 200 - 2,000 Hz)�
This product is intended for use in private
households only� Any type of use other than
that described above or any modification of
the product is prohibited and likely to cause
damage� The manufacturer accepts no
liability whatsoever for damage of any kind
resulting from use of the product other than
as intended� The product is not intended for
commercial use� The product is not suitable
for general indoor lighting in the home�
z Specifications supplied
1 work floodlight
1 tripod stand
(telescopic pole and tripod base)
1 instruction manual
z Description of parts
Handle
1
Floodlight
2
LED module
3
Telescopic pole
4
Tripod stand
5
Tripod base
6
Cable hook
7
8
GB/CY
Hand screw (tripod base)
8
Hand screw (telescopic pole)
9
Mains power cable
10
Mounting clamp
11
Folding bracket
12
Hand screw (folding bracket)
13
ON/OFF switch
14
z Technical data
Power supply
220-240 V AC, 50 Hz
voltage:
LED module
Light source:
(non-user replaceable)
Power
20 W
consumption:
1,500 lm with diffusor,
Luminous power:
2,000 lm without diffusor
Colour
6,500 K (cold white)
temperature:
Max. stand height: 1�54 m
IP65 (proof against
Protection rating
sprayed water)
Protection class: I
Cable length: 5 m
LED service life: approx. 30,000 h
Beam width: approx. 90°
Max. projection
40 cm²
area:
Colour
RA > 80
reproduction:
Minimum tilt angle
50°
(floodlight):