Service; Special Safety Directions For Battery-Operated Tools - Parkside PLSA 20-Li A1 Originalbetriebsanleitung

GB IE
• Only use the battery that is inten-
ded in an electric tool. The use of
other batteries may create a fire
hazard and lead to injury.
• When not in use, keep batteries
away from paper clips, coins,
keys, nails, screws or other small
metal objects that could cause the
contacts to be bridged. A short
circuit between battery contacts
can result in burns or a fire.
• When misused, fluid may leak
from the battery. Avoid any
contact with it. On accidental
contact, wash in running water.
If the fluid comes into contact
with the eyes, seek medical assi-
stance also. Leaking battery fluid
can cause skin irritation or burns.

Service

• Have your power tool serviced
by a qualified repair person
using only identical replace-
ment parts. This will ensure that
the safety of the power tool is
maintained.
Special safety directions for
battery-operated tools
• Ensure that the device is switched
off before inserting the battery.
Inserting a battery into a power
tool that is switched on may re-
sult in accidents.
18
• Recharge the batteries indoors
only because the battery charger
is designed for indoor use only.
• To reduce the electric shock ha-
zard, unplug the battery charger
from the mains before cleaning
the charger.
• Do not subject the battery to
strong sunlight over long periods
and do not leave it on a heater.
Heat damages the battery and
there is a risk of explosion.
• Allow a hot battery to cool be-
fore charging.
• Do not open up the battery and
avoid mechanical damage to the
battery. Risk of short circuit and
fumes may be emitted that irritate
the respiratory tract. Ensure fresh
air and seek medical assistance.
• Do not use non-rechargeable bat-
teries!
• Do not use any accessories that
are not recommended by
PARKSIDE. This can result in
electric shock or fire.
Observe the safety informati-
on and notes on charging
and proper use as shown in the in-
struction manual for your battery
and charger from the Parkside
X 20 V TEAM or X 12 V TEAM series.
A detailed description of the char-
ging process and further informa-
tion can be found in the separate
operating instructions.