Cleaning; Maintenance; Replacing The Filter - Parkside PMSSA 8 A1 Originalbetriebsanleitung

Cleaning

Always remove the
rechargeable bat-
tery before carrying
out work on the de-
vice.
Risk of injury!
Never spray down
the device with
water or place it
in water! Do not
use any abrasive
cleaning agents or
solvents. The device
could become da-
maged.
• Clean the housing with a
dry cloth or paint brush.
• Tap the filter (12) and clean
it with a brush or compres-
sed air.
If the filter is contaminated
and cannot be cleaned,
replace it!
See "Spare parts/Accesso-
ries".
• Wash the foam filter (
with lukewarm water and
soap and let it dry.
• Empty the collection cont-
ainer (1) after every use.
Clean the collection cont-
ainer (1) with a damp cloth.
• Always keep the ventilation
slit on the device housing
unobstructed otherwise the
device will overheat.

Maintenance

Replacing the filter

If contaminated, replace the filter
with a new one.
New filters can be acquired from
the online shop. See "Replace-
ment parts/Accessories".
1. Remove the collection
container (1) by pressing
the release button (3) and
detachingn the collection
container (1).
2. Remove the filter (12) from
the filter holder (11).
3. Place the new filter into the
filter holder. Ensure the filter
is positioned correctly and
securely.
4. Re-attach the collection
13) container (1) onto the de-
vice by placing it on the
underside of the device and
allowing it to latch into the
GB IE
33