Emptying The Collection Container - Parkside PMSSA 8 A1 Originalbetriebsanleitung

GB IE
Attach the crevice nozz-
le (10) as needed.
To switch on or off, briefly
press the On/Off switch (4)
once.
Emptying the
collection container
Empty the collection container
(1) after every use.
Empty the collection container
if suction performance is
decreasing.
If the collection container is full
of dust or the filter becomes
wet from wet vacuuming, the
cordless hand-held vacuum cle-
aner may become damaged!
Emptying the collec-
tion container after
wet vacuuming:
Hold the collection
container with the
tip pointing down-
wards when remo-
ving it to prevent
liquid getting into
the device!
1. Remove the collection con-
tainer (1) carefully by pres-
sing the release button (3)
32
and removing the collection
container (1).
2. Carefully remove the filter
(12) and filter holder (11)
from the collection cont-
ainer (1).
3. Empty the collection cont-
ainer (1).
4. Clean the collection con-
tainer (1) with a damp
cloth if required. If required,
clean the filter (12) as in-
dicated in the "Cleaning"
section.
5. Place the filter holder (11)
and filter (12) back into
the collection container (1).
Due to its shape, the filter
holder (11) can only be
inserted into the collection
container (1) in one positi-
on.
6. Re-attach the collection con-
tainer (1) onto the device.
Place it on the underside
of the device and allow it
to latch into the interlock
release on the top side of
the device.Note the catch
on the bottom of the device
and the collection container
(1).