9. Operation
9.1 Overview of button functions
Button
Switch device on: press briefly
Switch device off: Hold down for approx. 3 seconds
Volume up: press briefly A beep sounds when the maximum volume is
reached.
Jump to next track: Hold down for approx. 2 seconds
Volume down press briefly
Replay current track from the beginning: Hold down for
approx. 2 seconds
Jump to previous track: When restarting the current track, press and
hold the
Play/pause: press briefly
Activate Bluetooth
Disconnect Bluetooth
then possible immediately
Activate TWS mode: press briefly
Deactivate TWS mode: press briefly
9.2 Pair with a Bluetooth
The AUX IN socket (12) must not be used during the coupling process.
The Bluetooth
Enter '0000' if you are asked for a PIN during the pairing process. The connection may
take a long time to establish, depending on the device used.
•
Set your Bluetooth
nearby. Please consult the operating instructions of your Bluetooth
•
Briefly press the
brightly twice, a series of beeps will sound and then the power/charge LED (8) will flash blue
rapidly.The coupling mode is now active.
•
Select device SLXL 20 B1 from the list of found devices to pair the two devices. A series of
beeps will sound and the power/charge LED (8) will flash blue twice every 3 seconds once the
connection is successful.
(5) button again for approx. 2 seconds
®
®
device
®
device name of the speaker is SLXL 20 B1.
®
device, such as your smartphone, to search for available Bluetooth
button (7) to switch the speaker on. The power/charging LED (8) will flash
Button function
: press briefly, a beep sounds
®
connection: press briefly/a new pairing is
SilverCrest SLXL 20 B1
®
device.
English - 27
®
devices