Operation; Overview Of Button Functions; Pair With A Bluetooth Device - Silvercrest SLXL 30 C1 Bedienungsanleitung Und Sicherheitshinweise

9. Operation

9.1 Overview of button functions

Button
 Switch device on: press briefly
 Switch device off: Hold down for approx. 3 seconds
 Volume up: press briefly A beep sounds when the maximum volume is
reached.
 Jump to next track: Hold down for approx. 2 seconds
 Volume down press briefly
 Replay current track from the beginning:
approx. 2 seconds
 Jump to previous track: When restarting the current track, press and
hold the
 Play/pause: press briefly
 Activate Bluetooth
 Disconnect Bluetooth
then possible immediately
 Activate TWS mode: press briefly
 Deactivate TWS mode: press briefly
9.2 Pair with a Bluetooth
The AUX IN socket (9) must not be used during the coupling process.
The Bluetooth
Enter '0000' if you are asked for a PIN during the pairing process. The connection may
take a long time to establish, depending on the device used.
•
Set your Bluetooth
nearby. Please consult the operating instructions of your Bluetooth
•
Briefly press the on/off button
then the power/charging LED (15) will flash blue. Coupling mode is now active.
•
Select device SLXL 30 C1 from the list of found devices to pair the two devices. A series of
beeps will sound and the power/charging LED (15) will light up blue twice once the connection
is successful.
(2) button again for approximately two seconds
®
®
device
®
device name of the speaker is SLXL 30 C1.
®
device, such as your smartphone, to search for available Bluetooth
(1) to switch the speaker on. A series of beeps will sound and
Button function
: press briefly, a beep sounds
®
connection: press briefly/a new pairing is
SilverCrest SLXL 30 C1
Hold down for
®
device.
English - 11
®
devices