Handling And Operation; Pairing The Speaker With A Bluetooth; Device - Silvercrest SLB 10 A1 Bedienungsanleitung

Handling and operation

Pairing the speaker with a Bluetooth

NOTE
► If you want to pair the loudspeaker with a Bluetooth
3.5 mm jack socket w should not be occupied.
♦ Ensure that the speaker is switched off and the Bluetooth
switched on.
♦ Set the Bluetooth
devices. A detailed description of how to do this can be found in the
operating instructions for your Bluetooth
♦ Press and hold the
on. You will immediately hear a series of beeps, and the operating/
charging LED 9 will simultaneously flash blue and orange twice in a
row. The operating/charging LED 9 then flashes alternately orange
and blue. The Bluetooth
♦ Select the entry SLB 10 A1 from the list of found devices on your
®
Bluetooth
the two devices. You will hear a rising series of beeps, and the operating/
charging LED 9 will flash blue every 3 seconds once the connection
has been successfully established.
♦ Start playback on the Bluetooth
SLB 10 A1
device so that it scans for other Bluetooth
®
button 1 for about 3 seconds to switch the speaker
function is now activated automatically.
®
device and, if required, enter the code 0000 to connect
®

device

device.
®
device.
®
device, the
®
device is
®
®
GB │ IE │ 51 ■