Adjusting The Anti-Scalp Rollers - Toro Z Master Professional 7500-D-Serie Bedienungsanleitung

Adjusting the Anti-Scalp
Rollers
For maximum deck flotation, install the rollers 1 hole
position lower. Rollers should maintain a 6 mm (1/4
inch) clearance to the ground. Do not adjust the
rollers to support the deck.
1. Park the machine on a level surface.
2. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Adjust the anti-scalp rollers as shown in
26 and Figure 27.
Figure 26
1. Flange nut
2. Anti-scalp roller
-
EUTRAL LOCK
Figure
g227785
3. Bushing
4. Bolt
1. Bolt
2. Bushing
5. Torque the flange nut to 41 to 47 N∙m (30 to 35
ft-lb).
28
Figure 27
3. Anti-scalp roller
4. Flange nut
g227783