Adjusting The Full-Bag Indicator Switch; During Operation; Starting The Machine; Driving The Machine - Toro eS3200DC 72V Bedienungsanleitung

6. Install the grass catcher; refer to
Grass Catcher (page
Note:
The mower does not operate unless the
grass catcher is installed.
Adjusting the Full-Bag
Indicator Switch
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the machine and remove the key.
3. Remove the grass catcher; refer to
the Grass Catcher (page
4. Extend the lever to increase the sensitivity of the
switch; shorten it to decrease the sensitivity.
Figure 17
1. Decrease switch
sensitivity
5. Install the grass catcher; refer to
Grass Catcher (page
Installing the
19).
Removing
18).
2. Increase switch sensitivity
Installing the
19).

During Operation

Starting the Machine

1. Sit on the operator's seat.
2. Disengage the parking brake.
3. Ensure that the blade-control switch (PTO) is
disengaged.
4. Ensure that the drive-mode switch is in the
N
EUTRAL
5. Turn the key switch to the O

Driving the Machine

Note:
Always use caution when backing up and
turning.
1. Move the drive-mode switch to the F
R
EVERSE
2. Place your foot on the traction-control pedal and
slowly press it to start driving.
Note:
The farther you press the pedal, the
faster the machine moves.
3. Release the traction-control pedal and slowly
press the brake pedal to stop or slow the
machine.
Note:
Stop the machine before changing
direction to forward or reverse.

Shutting Off the Machine

1. Park the machine on a level surface.
g373733
2. Disengage the mower blades.
3. Engage the parking brake.
4. Turn the key switch to the O
remove the key.
20
position.
position.
N
position.
position and
FF
or
ORWARD