Positioning The Seat; Unlatching The Seat; Changing The Seat Suspension; During Operation - Toro Z Master Professional 7500-D-Serie Bedienungsanleitung

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable

Unlatching the Seat

To unlatch the seat, push the seat latch forward
(Figure 12).
Figure 12
1. Seat latch
(Figure 11).
Figure 11
2. Seat
Changing the Seat
Suspension
The seat is adjustable to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
To adjust it, turn the knob in front either direction to
provide the best comfort
g019754
1. Seat-suspension knob

During Operation

During Operation Safety

General Safety
g008956
•
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
•
Contacting the blade can result in serious personal
injury. Shut off the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position. When you turn the key to the
OFF position, the engine should shut off and the
blade should stop. If not, stop using your machine
immediately and contact an Authorized Service
Dealer.
•
Operate the machine only in good visibility and
appropriate weather conditions. Do not operate
the machine when there is the risk of lightning.
•
Keep your hands and feet away from the cutting
units. Keep clear of the discharge opening.
21
(Figure 13).
Figure 13
g019768