Toro Z Master Professional 7500-D-Serie Bedienungsanleitung Seite 12

1. Engine—Off
2. Engine—On
3. Engine—Start
1. Read the instructions before servicing or performing
maintenance to the machine.
2. Time interval
3. Check the engine-oil level.
4. Check the coolant level; refer to the Operator's Manual for
further instructions.
5. Check the tire pressure (2 locations).
6. Check hydraulic-fluid level; refer to the Operator's Manual
for further instructions.
126-9278
4. Push the bottom of the button to lower the deck.
5. Push the top of the button to raise the deck.
126-9279
7. Check the jackshaft-fluid level.
8. Grease the deck-drive PTO; refer to the Operator's Manual
for further instructions.
9. Check the air cleaner.
10. Grease the idler pivot; refer to the Operator's Manual for
further instructions
11. Grease the front caster wheel bearings (2 locations); refer to
the Operator's Manual for further instructions.
12. Grease the front caster pivots (2 locations); refer to the
Operator's Manual for further instructions.
10
decal126-9278
decal126-9279