Type Code - Endress+Hauser Proline Prosonic Flow 92F Sicherheitshinweise

0
ATEX II2G & II1/2G; IECEx Zone 1 & Zone 0/1

Type code

20
The type code describes the exact design and equipment level of the measuring system.
It can be read off the nameplate of the transmitter and sensor and is structured as follows:
P R O S O N I C F L O W
Item No.:
1 Instrument family
2 Electronics
3 Sensor
4 to 5 Nominal diameter
6 Hyphen
7 Design
8 Measuring pipe material, PN
9 Process connection
10 Calibration
11 Additional, certification
12 Approvals
13 Version
14 Cable, remote version
15 Cable entry
16 Display, operation
17 Software function
18 Outputs/inputs
Sensor (Item No. 3 in type code)
* Sensor
F Sensor F
X only transmitter (as spare part)
Approvals (Item No. 12 in type code)
* Version
Compact
C, U Remote (transmitter)
Remote (sensor)
Compact
3 Remote (transmitter)
Remote (sensor)
1)
IEC 60079-0: 2004 currently does not provide for any identification marking for the protection level of the device.
2)
Identification marking as provided in IEC 60079-26: 2006 for the protection level of the device.
9 2 * * * – * *
Approval
ATEX IECEx
1)
II2(1)G –
1)
II2(1)G –
1)
II2(1)G –
2)
II1/2(1)G Ga/Gb
1)
II2(1)G –
2)
II1/2(1)G Ga/Gb
Proline Prosonic Flow 92F
* * * * * * * *
Input /Output Explosion protection
A, W Ex d[ia] IIC T6 – T1
H, K Ex d[ia] IIC T4 – T1
A, W Ex d[ia] IIC T6 – T1
H, K Ex d[ia] IIC T4 – T1
A, W Ex ia IIC T6 – T1
H, K Ex ia IIC T4 – T1
A, W Ex ia/d[ia] IIC T6 – T1
H, K Ex ia/d[ia] IIC T4 – T1
A, W Ex d[ia] IIC T6 – T1
H, K Ex d[ia] IIC T4 – T1
A, W Ex ia IIC T6 – T1
H, K Ex ia IIC T4 – T1
Endress+Hauser
* *