Associated Documentation; Supplementary Documentation; Manufacturer's Certificates; Eu Type-Examination Certificate - Endress+Hauser Liquiphant M FTL50 Bedienungsanleitung

XA00031F-I

Associated documentation

Supplementary
documentation

Manufacturer's certificates

Extended order code

16
This document is an integral part of the following Operating Instructions:
• KA00143F/00, KA00163F/00 (FTL50, FTL51)
• KA00144F/00, KA00164F/00 (FTL50H, FTL51H)
• KA00162F/00, KA00165F/00 (FTL51C)
• KA00172F/00, KA00173F/00 (FTL70, FTL71)
Explosion-protection brochure:
CP00021Z/11
The Explosion-protection brochure is available:
• In the download area of the Endress+Hauser website: www.endress.com  Download  Advanced
 Documentation Code: CP00021Z
• On the CD for devices with CD-based documentation
EU Declaration of Conformity
→  3

EU type-examination certificate

Certificate number:
DEKRA 15 ATEX 0088
List of applied standards: See EU Declaration of Conformity.
IEC Declaration of Conformity
Certificate number:
IECEx DEK 15.0060
Affixing the certificate number certifies conformity with the standards (depending on the device
version).
• IEC 60079-0 : 2011
• IEC 60079-1 : 2014
• IEC 60079-26 : 2014
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
Operating Instructions.
Structure of the extended order code
FTL5x, FTL7x - ************* + A*B*C*D*E*F*G*..
------------------- -----------------------
Device type Basic specifications
* = Placeholder
At this position, an option (number or letter) selected from the specification is displayed instead
of the placeholders.
• Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
• Optional specifications
The optional specifications describe additional features for the device (optional features).
The number of positions depends on the number of features available.
The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the
feature group and consists of a number or a letter (e.g. J = test, certificate). The second digit
constitutes the value that stands for the feature within the group (e.g. A = 3.1 material (wetted
parts), inspection certificate).
---------------------------
Optional specifications
Liquiphant M, Liquiphant S
Endress+Hauser