Jansen -Economy 60 E30 (R30/G30) Bedienungsanleitung Seite 23

Hinweis
Remarque
Notice
Change of screw threads from M8 to M6
The screw threads for secondary leaf fittings are to be changed from M8 to M6 to ensure uniformity
of use in future.
Old article number M8
555.130 Rebate lever bolt*
555.341 Rebate lever bolt WK3*
555.131 Shoot bolt lock*
555.133 Off-set lock*
555.138 Espagnolette*
555.225 Connection fittings
550.269 Additional kit
550.455 Shoot bolt
555.220 Shoot bolt
555.221 Shoot bolt
550.373 Shoot bolt WK3
The discontinued articles are marked * in the above table. These articles will no longer be available
once current stocks have run out. The remaining fittings are only supplied in small quantities.
For future orders please pay attention to corresponding threads.
The old articles are listed in brackets in this document.
555.380 (555.130)
M6
New article number M6
555.380 Rebate lever bolt
555.381 Rebate lever bolt WK3
555.382 Shoot bolt lock
555.383 Off-set lock
555.384 Espagnolette
555.385 Connection fittings
555.386 Additional kit
555.387 Shoot bolt 1,5 m top
555.388 Shoot bolt 2,0 m top
555.389 Shoot bolt 1,5 m bottom
555.390 Shoot bolt WK3
M8
®
Jansen-Economy 60 E30 (R30/G30)
®
Jansen-Economy 60 E30 (R30/G30)
Jansen-Economy ® 60 E30 (R30/G30)
9/2004
34-21