Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Outer Foil And The Inner Blade; Replacing The File; Replacing The Sonic Scrub Brush - Panasonic ES‑EL9A Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
Foot care head
(Fig. 22)
1. Apply liquid hand soap to the
central part of the file.
2. Pour a small amount of water on
the file and turn the switch on.
3. Rinse any debris thoroughly
with water or lukewarm water.
4. After turning the switch off,
remove the frame and rinse
inside.
5. Wipe with a dry cloth and dry in
a well‑ventilated location.
Sonic scrub brush and
brush head
(Fig. 23)
1. Press the power switch to turn
on the power, and thoroughly
rinse debris from the sonic
scrub brush.
2. Press the power switch to turn
off the power, remove the
brush head, and thoroughly
rinse the underside of the
brush head.
3. Wipe the appliance with a dry
cloth and dry it well.
• To protect deformation of the
brush, dry it facing upward, and
then store the brush.
Replacing the outer foil
and the inner blade
We recommend replacing the outer
foil [
4] every year and the inner
F
blade [
8] every two years.
F
Remove the outer foil of the shaver
head [
] only when replacing it.
F
PB018265 - ES-EL9A_EL7B
ES-EL9A
ES-EL9A/ES-EL7B
(01GB)_11-06-19.indd 23
Replacing the outer foil (Fig. 24)
1. While pushing the outer foil
gently with the fingers, use a
fingernail to release the plastic
panel ( ) on the blade from the
hooks ( ) on the inside of the
frame.
2. The new outer foil should be
slightly bent and pushed in
until it is hooked in the frame.
Replacing the inner blade
(Fig. 25)
1. Remove the inner blade by
holding it at both ends and
pulling straight away from the
shaver head.
2. Insert the inner blade by
holding it at both ends and
press downward.

Replacing the file

The file lifetime is approximately
1 year (assuming a single use every
2 weeks with approximately 10
minutes per use). We recommend
replacing the file about once a year.
(Fig. 26)
1. Press down with your finger
and release the file.
2. Align the
shaped part with
the
mark side and press
down.
Replacing the sonic
scrub brush
ES-EL9A/ES-EL7B
Sonic scrub brush
(Scrub brush)
• See "Removing and attaching the
sonic scrub brush" (page 18) for
details regarding replacement of
the brush.
ES-EL9A
Once a year
(assuming
3 minutes use
per week)
23
2019/11/6 9:49:35

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Es‑el7aEs-el7b

Inhaltsverzeichnis