ReplacingTheOuterFoil - Panasonic ES-ED94 Bedienungsanleitung

3. Wash the head with water to wash out hair.
• Do not use hot water.
• If soap is not completely washed away, then a
white deposit can accumulate and prevent the
discs and the blades from moving smoothly.
• Rinse the shaver head with the frame
removed.
4. Turn the switch off, wipe the appliance with a dry cloth
and dry it well.
Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the
switch on.
3. Rinse any debris thoroughly with water or lukewarm
water.
4. After turning the switch off, remove the frame and rinse
inside.
5. Wipe with a dry cloth and dry in a well-ventilated location.
3 4 5
Sonic scrub head
1. Pour a small quantity of water and liquid hand soap into
the centre of the scrub brush.
2. Turn the switch on and then foam is created.
3. Use water to thoroughly rinse away foam and liquid hand
soap.
• Thoroughly rinse the hole in the centre of the scrub brush.
4. Switch off, remove the sonic scrub head and thoroughly
rinse the underside of the sonic scrub head.
5. Wipe the appliance with a dry cloth and dry it well.
3 4 5
Replacing the outer foil
We recommend replacing the outer foil [H9] every year and
the inner blade every two years. Remove the outer foil of the
shaver head [H] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (b) on the blade
from the hooks (a) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
1 2


21