Medtronic autoLog IQ Kurzleitfaden Seite 9

12. Pull the pump lever and hold it open. Stretch the pump
tubing around the pump head and over the pump outlet
tubing guide. Release the pump lever.
14. Spike the middle manifold tubing into the saline bag or
bags. Note: If using one saline bag, confirm that the clamp
on the unused saline line is closed.
Wash kit setup
13. Press . The message appears: Connect the saline line
and reservoir. Press
15. Connect the left-hand tube of the manifold to the
blue-capped step-down connector at the bottom of the
reservoir, and then open the clamp on the step-down
connector.
to resume.
English 7