Medtronic autoLog IQ Kurzleitfaden Seite 8

Wash kit setup
9. Insert the yellow-capped connector into the yellow-capped
inlet port on the waste bag. Confirm that there are no kinks
in the waste line.
11.1. Place the manifold into the recessed cavity. Place the
3 manifold tubing lines into the tubing guides, and ensure
that each tube is fully seated in each guide.
10. The message appears: Insert the kit in the valve and
the pump. Press to resume.
11.2. Place the single tubing line of the manifold into the air
detector. Close the manifold cover. Rotate the manifold
cover latch until the lock indicators are aligned.
English 6