Charging The Appliance - Silvercrest SHBS 500 D4 Bedienungsanleitung

Charging the appliance

NOTE
► The appliance is powered by a rechargeable lithium-ion battery.
Before using the appliance for the first time, the battery must be
charged. The plug LED
► If the plug LED
discharged.
1) Switch off the appliance (if necessary) using the On/Off switch I/O 5
by sliding the On/Off switch I/O 5 to the position O.
2) Connect the barrel plug 9 of the mains adapter 8 to the appliance
(see fig. 1).
3) Plug the mains plug of the mains adapter 8 into an easily accessible
mains socket (100 – 240 V ∼, 50/60 Hz).
4) The battery charges and the plug LED
tery LED
SHBS 500 D4
7 lights up red during charging.
7 flashes red, the battery is nearly completely
Fig. 1
6 will flash blue as soon as the battery is fully charged.
7 lights up red. The bat-
GB│IE│NI│CY
│
11 ■