Using The Appliance; Cleaning And Care - Silvercrest SBT 1.5 B1 Bedienungsanleitung

■ Treat the skin with a peeling treatment or a massage glove before
shaving. This helps remove dead skin cells, prevents ingrowing
hairs and makes fine hair stand up. The appliance can cut the
hair better this way.
■ After shaving, treat the skin with a moisturising lotion or cream.
Ideally, use a cream containing aloe vera or camomile extracts to
soothe and nourish the skin.

Using the appliance

CAUTION – PROPERTY DAMAGE!
►
1) Remove the protective cap
2) Push the On/Off switch
lights up.
3) Pull the skin taut with one hand.
4) Place the appliance perpendicular on the skin and move it over
the skin in circular movements without exerting any pressure.
5) When you have finished the treatment, push the On/Off switch
in the direction of the 0 marking to switch off the appliance. The
skin light
6) Replace the protective cap

Cleaning and care

CAUTION – PROPERTY DAMAGE!
►
■ After each use, clean the shaving head
cleaning brush
■ Disinfect the shaving head
cleaning it with disinfectant spray.
■ Wipe the housing with a damp cloth. If required, use some mild
detergent on the cloth. Ensure that the appliance is completely
dry before the next use.
SBT 1.5 B1
Downloaded from www.Manualslib.com
The appliance is not suitable for wet shaving.
goes out.
Never immerse the appliance in water or other liquids!
to remove loose hairs.
manuals search engine
from the housing.
towards the I marking. The skin light
on the housing.
using the supplied
regularly by spraying and
GB │ IE │ NI │
9 ■