Shaving; Trimming Nose And Ear Hair; Cleaning And Care - Silvercrest HAIR & BEARD TRIMMER Bedienungsanleitung

6.7 Shaving

Shaving attachment
NOTE: your skin must be clean and dry.
• Hold the hair and beard trimmer 5 at a
right angle to the skin surface and gen-
tly guide it over your face.
• Shave against the direction of your
beard growth.
• Stretch your skin in complicated areas,
such as the chin, to achieve better re-
sults.
6.8 Trimming nose and ear
hair
Nose/ear hair trimmer attach-
ment
13
• Insert only the metal tip slowly into a
nostril or an ear.
• Slowly move the hair and beard trim-
mer 5 with a circular motion to trim the
hair.
10 GB
3

7. Cleaning and care

DANGER! Risk of electric
shock!
Unplug the power unit 11 from the wall
socket before cleaning the hair and
beard trimmer 5 and the battery charg-
er 12.
WARNING! Risk of injury!
Always switch the hair and beard trim-
mer 5 off before cleaning.
WARNING! Risk of material dam-
age!
Do not use any astringent or abrasive
cleaning agents.
NOTE: clean and oil the device after every
use.
Hair and beard trimmer
tery charger
12
• Wipe the casing of the hair and beard
trimmer and the battery charger with a
damp cloth.
Comb attachments
• Remove the comb attachment. Rinse the
comb attachment with water and let it
dry before using it again.
Hair trimmer, beard trimmer and
precision trimmer attach-
ments , ,
14 15
1. Figure A: remove the attachment from
the hair and beard trimmer 5 by press-
ing it with the thumb towards the rear.
2. Remove the hair remnants from the at-
tachment using the cleaning brush 18
included in the delivery.
3. Apply a few drops of blade oil 17 to the
cutting edge of the attachment. Using a
soft cloth, wipe off the surplus oil, if nec-
essary. Only use acid-free oil, such as
e.g. sewing machine oil.
and bat-
5
,
2 1
4