Changing Between Celsius And Fahrenheit; How To Recall 30 Readings In Memory Mode; Bluetooth ® Function; Downloading The «Microlife Connected Health+» App - Microlife NC150 BT Bedienungsanleitung


NOTE:
 Patients and thermometer should stay in similar room
condition for at least 30 minutes.
 Don't take a measurement while or immediately after nursing a
baby.
 Don't use the thermometer in high humidity environments.
 Patients should not drink, eat or exercise before/while taking
the measurement.
 Don't move the measurement device from the measuring area
before hearing the termination beep.
 10 short beeps and a red LCD backlight alert the patient that he/
she may have a temperature equal to or higher than 37.5 °C.
 Always take the temperature in the same location, since
temperature readings may vary according to locations.
 Doctors recommend rectal measurement for newborn infants
within the first 6 months, as all other measuring methods might
lead to ambiguous results. If using a non contact thermometer
on those infants, we always recommend verifying the readings
with a rectal measurement.
 In the following situations it is recommended that three temper-
atures are taken with the highest one taken as the reading:
1. Children under three years of age with a compromised
immune system and for whom the presence or absence of
fever is critical.
2. When the user is learning how to use the thermometer for
the first time until he/she has familiarized himself/herself with
the device and obtains consistent readings.
3. If the measurement is surprisingly low.
 Readings from different measuring sites should not be
compared as the normal body temperature varies by
measuring site and time of day, being highest in the evening
and lowest about one hour before waking up.
Normal body temperature ranges:
- Axillar: 34.7 - 37.3 °C / 94.5 - 99.1 °F
- Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F
- Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F
- Microlife NC 150 BT: 35.4 - 37.4 °C / 95.7 - 99.3 °F

8. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahr-
enheit or Celsius. To switch the display between °C and °F, simply
turn OFF the unit, press and hold the START button 4 for 5
NC 150 BT
seconds; after 5 seconds, the current measurement scale («°C» or
«°F» icon) will flash on the display AP. Change the measurement
scale between °C and °F by pressing the START button 4. When
the measurement scale has been chosen, wait for 5 seconds and
the unit will automatically enter the «ready for measuring» mode.

9. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings with a record of
both time and date.
 Recall mode AQ: Press the M-button 8 to enter recall mode
when the power is off. The memory icon «M» will flash.
 Reading 1 - the last reading AR: Press and release the M-
button 8 to recall the last reading. Number «1» and a flashing
«M» are displayed.
 Reading 30 - readings in succession: Press and release the
M-button 8 consecutively to recall the last 30 readings in
succession.
Pressing and releasing the M-button 8 after the last 30 readings
have been recalled will resume the above sequence from reading 1.
®
10. Bluetooth Function
This device can be used in conjunction with a smartphone running
the «Microlife Connected Health+» App. The measurement results
will be automatically transferred via Bluetooth
Downloading the «Microlife Connected Health+» App
Download «Microlife Connected Health+» App for free from Google
Play™ (Android) or App Store (iOS) and install it on your smartphone.
®
How the Bluetooth Function works
®
The Bluetooth function on your device will automatically turn on
and will be ready to connect with the «Microlife Connected Health+»
App after the device is switched on. Your device will automatically
upload the data once it is connected to the smartphone.
®
Bluetooth Icon Indicator
®
The Bluetooth icon indicator on your device, located in the middle
left portion of the display, is designed to provide information about
the connection between your device and smartphone.

NOTE:
®
 The Bluetooth
function is enabled: The Bluetooth
cator AK appears steady on the display.
®
.
®
icon indi-
EN
4