Changing Between Celsius And Fahrenheit; How To Recall 30 Readings In Memory Mode; Error Messages; Cleaning And Disinfecting - Microlife IR 200 Handbuch

 Patients should not drink, eat or exercise before/while taking
the measurement.
 Doctors recommend rectal measurement for newborn infants
within the first 6 months, as all other measuring methods might
lead to ambiguous results.
 Readings from different measuring sites should not be
compared as the normal body temperature varies by
measuring site and time of day, being highest in the evening
and lowest about one hour before waking up.
Normal body temperature ranges:
- Axillar: 34.7 - 37.3 °C / 94.5 - 99.1 °F
- Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F
- Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F
- Microlife IR 200: 35.4 - 37.4 °C / 95.7 - 99.3 °F

8. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahr-
enheit or Celsius. To switch the display between °C and °F, press
and hold the MODE button 4 for 3 seconds; the beeper icon is
shown on the display. Press the MODE button again; the current
measurement scale («°C» or «°F» icon) will be shown on the
display AQ. Change the measurement scale between °C and °F by
pressing the M-button 3. When the measurement scale has been
chosen, press the START/IO button 6 to enter the «ready for
measuring» mode; otherwise the device automatically switches to
ready for measuring after 10 seconds 9.

9. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings with a record of
both time and date.
 Recall mode AR: Press the M-button 3 to enter recall mode
when the power is off. The memory icon «M» will flash.
 Reading 1 - the last reading AS: Press and release the M-
button 3 to recall the last reading. Number «1» and a flashing
«M» are displayed.
Pressing and releasing the M-button 3 after the last 30 readings
have been recalled will resume the above sequence from reading 1.

10. Error Messages

 Measured temperature too high BT: Displays «H» when
measured temperature is higher than 43 °C / 109.4 °F in body
mode or 100 °C / 212 °F in object mode.
6
 Measured temperature too low BK: Displays «L» when
measured temperature is lower than 34.0 °C / 93.2 °F in body
mode or 0 °C / 32 °F in object mode.
 Ambient temperature too high BL: Displays «AH» when
ambient temperature is higher than 40.0 °C / 104.0 °F.
 Ambient temperature too low BM: Displays «AL» when
ambient temperature is lower than 15.0 °C / 59.0 °F in body
mode or lower than 5.0 °C / 41.0 °F in object mode.
 Incorrect location indication AN: The probe is not correctly
inserted in the ear canal. Please insert the probe as described
in this manual.
 Error function display AO: The system has a malfunction.
 Blank display BO: Check if the battery has been loaded
correctly. Also check polarity (<+> and <->) of the battery.
 Flat battery indication BP: If only the «battery» icon is shown
on the display, the battery should be replaced immediately.

11. Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol (70%
Isopropyl) to clean the thermometer casing and the measuring
sensor. Ensure that no liquid enters the interior of the device. Never
use abrasive cleaning agents, thinners or benzene for cleaning and
never immerse the device in water or other cleaning liquids. Take
care not to scratch the surface of the sensor lens and the display.
12. Battery Replacement
This device is supplied with one lithium battery, type CR2032. The
battery needs replacing when only the «battery» icon BP is shown
on the display.
Remove the battery cover BS by sliding it in the direction shown.
Insert the new battery with the + at the top.
Batteries and electronic devices must be disposed of in
accordance with the locally applicable regulations, not with
domestic waste.
13. Guarantee
This device is covered by a 5 year guarantee from the date of
purchase. The guarantee is valid only on presentation of the guar-
antee card completed by the dealer (see back) confirming date of
purchase or the receipt.
 The guarantee covers the device. The battery and packaging
are not included.