Electrical Installation - Siko GS04 Originalmontageanleitung

GS04
Installation

4.2 Electrical Installation

Destruction of parts of equipment and loss of regulation control
WARNING
` All lines for connecting the sensor must be shielded.
` Do not disconnect or close live connections.
` Perform wiring work in the de-energized state only.
` Use strands with suitable ferrules.
` Prior to switching on check all mains and plug connections.
Unforeseen actions of the sensor or other devices
WARNING
The sensor is protected against EMC irradiation and emission (electromag-
netic compatibility). Excessive external EMC radiation may trigger unfore-
seen sensor actions (e. g. sensor's destruction, false measuring values).
` Perform wiring work in accordance with the EMC measures IEC 61326-1
` Check the correct execution of the EMC measures.
Basically, all connections are protected against external interference.
NOTICE
Choose a place of operation that excludes inductive or capacitive interfe-
rence influences on the sensor. When mounting the system keep a maxi-
mum possible distance from lines loaded with interference. If necessary,
provide additional installations including screening shields or metallized
housings.
Electrical connection E1
Strand color Designation
brown
yellow
red
orange
black
green
Electrical connection E15 + E17
This sensor have been prepared for connection to SIKO position indicator.
NOTICE
No modification of the sensor connection (e. g. cable modification) is per-
mitted.
Electrical connection E16
This sensor have been prepared for connection to SIKO electronic display.
NOTICE
No modification of the sensor connection (e. g. cable modification) is per-
mitted.
GS04 · Date 15.04.2015 · Art. No. 86318 · Mod. status 154/15
and chapter 4.2.
Vcc
Cos
Sin
Sin/
GND
Cos/
English 15