Hitachi YUTAKI M-Serie Bedienungsanleitung Seite 31

ELECTRICAL AND CONTROL SETTINGS
Mark Part name
27(L) Water Pump 2 (WP2)
28
Aquastat security for circuit 2 (WP2)
29
30(N)
Electrical Heater DHW Output
31(L)
32(C) Common line
33(L) 3-way valve for DHW tank
34(N) N common
Output 1 (3-way valve for swimming
35(L)
pool) (*)
36(L) Output 2 (Water pump 3 (WP3)) (*)
37
Output 3 (Auxiliary boiler or electric
heater) (*)
38
39
Output 4 (Solar) (*)
40
?
N O T E
(*): Inputs and outputs explained in the table are the factory-set options. By means of the unit controller, some other inputs and outputs functions can
be configured and used. Please, refer to the Service Manual for detailed information.
9.5 SETTING OF DIP SWITCHES AND RSW SWITCHES
9.5.1 Setting of DIP Switches for IPM-PCB
3HP
9.5.2 Setting of DIP Switches for PCB1

Quantity and Position of DIP Switches

DSW1: For Test Run
Factory setting
21 PMML0342B rev.1 - 03/2016
All manuals and user guides at all-guides.com
When there is a second temperature application, a secondary pump is the circulating pump for
the secondary heating circuit.
Terminals intended for the connection of the Aquastat security accessory (ATW-AQT-01) for
controlling water temperature of the circuit 2.
If DHW tank contains an electric heater, the air to water heat pump can activate it if the heat
pump cannot achieve the required DHW temperature by itself.
Common terminal for the 3-way valve for DHW tank.
The air to water heat pump can be used to heat DHW. This output will be on when DHW is
activated.
Neutral terminal common for 3-way valve of DHW tank and outputs 1 and 2.
The air to water heat pump can be use to heat swimming pool. This output will be ON when
swimming pool is activated.
When there is a hydraulic separator or buffer tank, additional water pump (WP3) is needed.
The boiler can be used to alternate with the heat pump when the heat pump cannot achieve the
required temperature by itself.
A water electric heater (as accessory) can be used to provide the additional heating required on
the coldest days of the year.
Output for solar combination with Domestic Hot Water Tank.

4HP
5HP
Factory setting
6HP

Factory setting
Description
DSW2
DSW3: Capacity
RASM-3VNE
ON
1 2 3 4 5 6
RASM-4VNE RASM-5VNE
ON ON
1 2 3 4 5 6 1 2 3 4 5 6
RASM-4NE RASM-5NE
ON
ON
1 2 3 4 5 6
1 2 3 4 5 6
RASM-6VNE
ON
1 2 3 4 5 6
RASM-6NE
ON
1 2 3 4 5 6