Elica NIKOLATESLA PRIME BL/F/83 Montage- Und Gebrauchsanweisung Seite 69

Activation filter saturation indicator
This indicator is normally deactivated.
To activate it, proceed as follows:
- turn on the extractor hob via
- with the extraction motor and cooking zones off, press the
Selection zone (12)
- long press "
appear alternately flashing in the Display (12)
F = carbon/ceramic odour filters
G = grease filter
Carbon/ceramic odour filters
−
press on the Display (12) when the letter "F"
appears
−
press "
−
long press "
activation of the carbon/ceramic odour filter
indicator
Grease filter
−
press on the Display (12) when the letter "G"
appears
−
press "
−
long press "
activation of the grease filter indicator
The suction surface is designed to be used in
combination with a Window sensor KIT (not provided by
the manufacturer)
When installing the Windows sensor KIT (only in the case of
use of the surface in SUCTION mode), the suction will stop
operating every time when the KIT which with the surface is
equipped detects that the window is closed in the room where
it is installed.
It is recommended the purchase of the FDS KIT - 100
Elektrotechnik Schabus, available at authorised Elektrotechnik
Schabus centres or directly on the Internet site
www.elektrotechnik-schabus.de.
- The electrical connection of the suction surface KIT
must be carried out by qualified and specialised technical
personnel.
- The manufacturer of the suction surface declines all
responsibility for any inconvenience, damage or fire
caused by defects and/or problems of malfunctioning
and/or incorrect installation of the KIT.
;
" (11) until the letters "F" – "G"
" (13) – flashing light
" (11) again to confirm the
" (13) – fixed light
" (11) again to confirm
65