Elica NIKOLATESLA PRIME BL/F/83 Montage- Und Gebrauchsanweisung Seite 67

at this point:
- the Display (2) of the left rear zone (RL) will show in
alternate sequence the symbols
is possible to perform the setting:
select the Display (2-RL)
then scroll on the Selection bar (3), until the
" "
symbols C
the Display (2-FL) will show the current setting**
0 = 7.4 KW
1 = 4.5 KW
2 = 3.1 KW
** by default the setting is 7.4 KW
To change the Power Limitation setting
- press the Display (2) of the left front area (FL)
- then scroll on the Selection bar (3), to select the new setting
- to save the choice made, press the
seconds; a prolonged audible signal will be emitted to confirm
the successful setting
" " " "
C and 0 , indicating that it
" "
and 8 ,appear
ON/OFF key (1), for 2
63