Dual Zone Operation - Clatronic AR 760 DVD/TFT Bedienungsanleitung, Garantie

11. DUAL ZONE OPERATION

"2-Zone" Dual A/V Zone Multi Entertainment Operation:
This unit is equipped with the most advance "Dual A/V Zone" feature. This function is useful if the user would
like to select different modes of the Audio and Video (AV) output source for Front and Rear Speakers and TFT
Screens. For example, user can select to listen to Tuner music for front speakers and rear speaker for DVD
movie. And if the user has One or more TFT screens installed in the rear seat or inside the Car, the Dual A/V
Zone function allow the users to enjoy TWO different Video sources. For example, on the front in-dash Built-In
TFT screen can display the video from the Game Console and the other screen in the rear seat can display
video from DVD Movie or other A/V source. The detail operation as follow:
On/Off operation
•
"Off" is the default setting.
•
Long press the "2-Zone" button on the control panel or remote control to switch between Dual Zone On
or Off. The "2-Zone" will appear on the TFT after Dual Zone is selected "on".
To Select Front / Rear AV Sources
•
Once "ON" is selected, Short Press the "AUDIO" button repeatedly to change between the F-Zone
(Front ) and the R-Zone (Rear) sources.
•
If Front Zone "F-Zone" is selected, user have 10 seconds to use the Volume UP / DOWN button to
navigate through different modes:
Tuner > DVD > AV - 1 > AV 2 are available for selection for Front AV Output.
•
If Rear Zone "R-Zone" is selected, user have 10 seconds to use the Volume UP / DOWN button to navi-
gate through different modes:
Tuner > DVD > AV -1 > AV 2 are available for selection for Rear AV Output
•
If no selection is being made within 5 seconds, the unit will resume to the pervious mode.
AV-1 & AV 2 are considered as the same mode / source in the DUAL ZONE function. So if either the
Front or Rear Source is set to AV-1 or AV-2 mode, The other ZONE is not allowed to select the AV-2
or AV-1 Mode eg: If F-Zone is selected "AV-1", then R-Zone is not allow to have "AV-2".
To operates function of Front / Rear Sources
•
The Front Panel & Remote control, is defaulted to control the FRONT source's function / operation.
•
When DUAL ZONE is turned "ON", the MODE button is used to change between the Front Source &
Rear Source. Press the MODE button repeatedly to change between Front and Back.
•
The LCD will display the Rear Source mode for 10 seconds. User has 10 seconds to make the desired
operation on the Rear Source's function on the Front Panel or Remote.
•
The LCD will automatically switch back to the Front Source after 10 seconds. And the Front Panel and
Remote now is resumed to operate for Front Source's function again.
The default setting when Dual Zone is "ON"
•
When DUAL ZONE is turned on, the audio output will be muted for about 1 second.
•
The default source / mode for Front ZONE is Tuner & for Rear ZONE is "DVD"
•
The default Volume level is "12" for both Front & Rear ZONE audio output. (or the Volume Level set as
VOL PGM Level set in the Menu)
•
The LCD display is defaulted to display the Front Mode.
•
When Dual Zone is "ON", some of the AUDIO FUNCTION WILL NOT BE FUNCTIONAL, THESE
FUNCTION ARE: Bass / Treble / Middle / Balance / Fader / Sub-woofer / iX-bass
The default setting when Dual Zone is in "OFF" mode
•
The default audio output reverts to what the user selected for the FRONT Zone source when DUAL
ZONE IS "OFF". For example: When the DUAL Zone is "ON ", user has selected DVD for Front ZONE &
Tuner for Rear ZONE. Once DUAL ZONE is turned "OFF", Audio Output for all 4 speakers becomes
"DVD" mode.
All manuals and user guides at all-guides.com
77