Digital Output Setting; Dynamic Range Control Setting - Clatronic AR 760 DVD/TFT Bedienungsanleitung, Garantie

Digital Output Setting

Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in har-
mony with the audio equipment (e.g. receiver, speakers) connected to the player. The following options are
available:
PCM =
Bitsteam =
Off =

Dynamic Range Control setting

Selecting the DRC setting allows the user to enable/disable the DRC. The following options are available:
On =
Off =
Ratings Setting Change
1. Using the LEFT/RIGHT direction buttons, move to the Rating button and press OK; the player's Rating
settings will appear:
2. Use the UP/DOWN direction buttons to select the setting to be changed.
The following subsections explain how to change each of the player's Rating settings.
Password Selection to Lock and Unlock the Parental Control Rating
Selecting the Password Setting: Allows the user to enter a password, to lock and unlock the parental control
rating setting into the player. The following options are available:
•
Locking the Password: Enter four digits using the number keys. Each number entered is overwritten by "
*
". When all four have been entered, press the OK button. The "locked" icon (
password is saved in non-volatile memory.
•
Unlocking the Password: Enter the four-digit password using the number keys. Each number is overwrit-
ten by " * ". When all four ahve been entered, press the OK button.If the password was entered cor-
rectly, the "unlocked" icon (
password was entered no change will occur, and the user may attempt to enter the password again.
All manuals and user guides at all-guides.com
A S/PDIF output is connected to a receiver that accepts PCM S/PDIF.
A S/PDIF output is connected to a receiver that accepts CDTS/ACS/
MP3/WMA/MPEG/PCM S/PDIF(factory defance)
Digital audio output is disabled.
DRC is On.
DRC is Off (Factory default)
•
(Unlocked) =
•
(Locked) =
) will appear, and the password is erased from memory. If the wrong
112
The parental control is unlocked and may be changed in
the Rating selection (factory default)
The parental control is locked so no change may be
made to the Rating selection
) will appear, and the