Inhaltszusammenfassung für Bosch Rexroth PST6 323 Serie
Seite 1
The Drive & Control Company Rexroth PST6xxx.323 Schweißsteuerung mit Thyristor-Leistungsteil Weld Timer with Thyristor Power Unit Typspezifische Anleitung | Type-Specific Instructions Edition 04 R911172804...
R911172804 | PST 6xxx.323 Bosch Rexroth AG 5/44 Zu dieser Dokumentation Zu dieser Dokumentation Gültigkeit der Dokumentation Diese Dokumentation gilt als Ergänzung für die Anleitung Rexroth PST 6xx0 Schweißsteuerung mit Thyristor-Leistungsteil. Der Inhalt bezieht sich auf • den Anschluss (Netzversorgung) •...
6/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Zu dieser Dokumentation Darstellung von Informationen Damit Sie mit dieser Dokumentation schnell und sicher mit Ihrem Produkt arbeiten können, werden einheitliche Sicherheitshinweise, Symbole, Begriffe und Abkürzungen verwendet. Zum besseren Verständnis sind diese in den folgenden Abschnitten erklärt.
R911172804 | PST 6xxx.323 Bosch Rexroth AG 7/44 Sicherheitshinweise Sicherheitshinweise Dieses Kapitel enthält wichtige Informationen zum sicheren Umgang mit dem beschriebenen Produkt. Die Sicherheitshinweise sehen Sie bitte unter Tab. 1: Erforderliche und ergänzende Dokumentationen Rexroth PST 6xx0 Schweißsteuerung mit Thyristor-Leistungsteil Betriebsanleitung und Rexroth Schweißsteuerung Sicherheits- und Gebrauchshinweise nach.
Seite 9
R911172804 | PST 6xxx.323 Bosch Rexroth AG 9/44 Anschlussplan /DO1 /DI1 5VDC /DO2 /DI2 RBST Prop.-Ventil aktiv Frei Frei E 02 Frei E 03 Frei E 04 Frei E 05 Frei E 06 Frei E 07 Frei A 00 Frei...
Seite 10
10/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Anschlussplan Abb. 3: Anschlussbeispiele...
Seite 11
R911172804 | PST 6xxx.323 Bosch Rexroth AG 11/44 Anschlussplan PST 6100 L / W PST 6250 L / W Netz Netz 400VAC - 400VAC - 600VAC 600VAC max. 50 mm max. 95 mm Schweiß- Schweiß- Transformator Transformator max. 50 mm max.
Seite 13
R911172804 | PST 6xxx.323 Bosch Rexroth AG 13/44 Ein/Ausgangsfeld Bits Eingänge (Steuerwort): Fehler zurücksetzen mit Ablaufwiederholung Zündung extern ein Punktanwahl Bit 00 Punktanwahl Bit 01 Punktanwahl Bit 02 Punktanwahl Bit 03 Punktanwahl Bit 04 Punktanwahl Bit 05 Punktanwahl Bit 06...
Seite 14
14/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Ein/Ausgangsfeld Bits Eingänge (Steuerwort): Frei Frei Frei Frei Frei Frei Frei Frei Frei Frei Frei Frei Frei Frei Frei Serielles Ausgangsfeld Tabelle 7: Bits Ausgänge (Statuswort): Fortschaltkontakt Fräsanfrage Bit 0 Fräsanfrage Bit 1 Fräsanfrage Bit 2...
Seite 15
R911172804 | PST 6xxx.323 Bosch Rexroth AG 15/44 Ein/Ausgangsfeld Bits Ausgänge (Statuswort): Prop.-Ventilanwahl Bit 00 Prop.-Ventilanwahl Bit 01 Prop.-Ventilanwahl Bit 02 Prop.-Ventilanwahl Bit 03 Prop.-Ventilanwahl Bit 04 Prop.-Ventilanwahl Bit 05 Prop.-Ventilanwahl Bit 06 Prop.-Ventilanwahl Bit 07 Prop.-Ventilanwahl Bit 08 Prop.-Ventilanwahl Bit 09 Prop.-Ventilanwahl Bit 10...
18/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Merkmale 7.1.6 Serieller Ausgang „Mindestens eine Elektrode hat Zählerstand 0“ Wenn mindestens eine benutzte Elektrode den Zählerstand 0 hat, so wird dieser Ausgang gesetzt, anderenfalls wird er zurückgenommen. Benutzte Elektroden sind alle Elektroden(außer 0), die einem Schweißprogramm zugeordnet sind.
R911172804 | PST 6xxx.323 Bosch Rexroth AG 19/44 Statuscodes Statuscodes Kode (Dez) Bedeutung: Hardware – BOS konsultieren Kein Schweißprogramm Ablauf gesperrt Kein Schweißstrom Schweißstrom zu klein Schweißstrom zu groß Schweißstrom zu klein in Folge Messbereich überschritten Zeit zu klein Zeit zu groß...
20/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Ablaufdiagramme Ablaufdiagramme Start Programmanwahl Zündung ein, extern Druck-Ausg. Fortschaltkontakt FK (Start/Dauer vor Ende NHZ programmierbar) 1. Vorhaltezeit Vorhaltezeit 1. Stromzeit 1. Pausenzeit 2. Stromzeit 3. Pausenzeit 3. Stromzeit Nachhaltezeit Abb. 5: Beispiel normaler Ablauf, Einzelpunkt...
Seite 21
R911172804 | PST 6xxx.323 Bosch Rexroth AG 21/44 Ablaufdiagramme Start Programmanwahl Zündung ein, extern Druck-Ausg. Fortschaltkontakt FK (Start/Dauer vor Ende NHZ programmierbar) 1. Vorhaltezeit Vorhaltezeit 1. Stromzeit 1. Pausenzeit 2. Stromzeit 3. Pausenzeit 3. Stromzeit Nachhaltezeit Abb. 6: Beispiel normaler Ablauf, Naht...
Seite 22
22/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Ablaufdiagramme Notizen:...
Seite 23
R911172804 | PST 6xxx.323 Bosch Rexroth AG 23/44 Contents Contents To this Documentation ................25 Validity of the documentation ............25 Required and supplementary documentation ........25 Display of information ............... 26 1.3.1 Safety instructions ............26 1.3.2 Symbols ................26 1.3.3...
Seite 24
24/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Contents...
R911172804 | PST 6xxx.323 Bosch Rexroth AG 25/44 To this Documentation To this Documentation Validity of the documentation This documentation applies to the Instruction manual Rexroth PST6xx0 Weld timer with Thyristor power unit. The content belong to • Connection (power supply) •...
26/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 To this Documentation Display of information In order to enable you to work with your product in a fast and safe way, uniform Safety instructions, symbols, terms and abbreviations are used. For a better understanding they are explained in the following sections.
R911172804 | PST 6xxx.323 Bosch Rexroth AG 27/44 Safety instructions Safety instructions For safety instructions, please refer to Table 1: Required and supplementary documentation Rexroth PST6xx0 Weld timer with Thyristor power unit Instructions and the Rexroth Weld Timer Safety and user information.
32/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Input/Output array Input/Output array Discrete 24 V input/output field Discrete inputs Tab. 4: Bits Inputs E 00 Prop.-Valve active E 01 Not used E 02 Not used E 03 Not used E 04...
Seite 33
R911172804 | PST 6xxx.323 Bosch Rexroth AG 33/44 Input/Output array Bits Inputs (control word) Reset fault with reweld Weld on, external Spot selection Bit 00 Spot selection Bit 01 Spot selection Bit 02 Spot selection Bit 03 Spot selection Bit 04...
Seite 34
34/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Input/Output array Bits Inputs (control word) Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used Not used...
Seite 35
R911172804 | PST 6xxx.323 Bosch Rexroth AG 35/44 Input/Output array Bits Outputs (status word) Proportional valve Bit 00 Proportional valve Bit 01 Proportional valve Bit 02 Proportional valve Bit 03 Proportional valve Bit 04 Proportional valve Bit 05 Proportional valve Bit 06...
36/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Input/Output array Bits Outputs (status word) Not used Not used Not used Not used Not used Not used Other inputs/outputs Other inputs Tab. 8: Inputs Other outputs Tab. 9: Outputs Analog Pressure Output...
R911172804 | PST 6xxx.323 Bosch Rexroth AG 37/44 Features Features Sequence: Standard 50/60 Hz (sequence parameter in net periods) I/O-board: PS5 IBS Fern (For details, see Tab. 1: Required and supplementary documentation Rexroth PST6xx0 Weld timer with Thyristor power unit Instructions)
38/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Features 7.1.7 Serial output „At least one electrode has warning“ If at least one electrode changes in prewarning, then this output will be set, otherwise the output will be reset. Used electrodes are all electrodes (excepted 0), which are assigned to a welding program.
R911172804 | PST 6xxx.323 Bosch Rexroth AG 39/44 Status codes Status codes Code (decimal) Meaning: Hardware – consult BOS No welding program Process disabled No welding current Low welding current High welding current Low curent series of welds Range exceeded...
40/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Timer diagrams Timer diagrams Start Program selection Weld on external Pressure output Weld complete contact WC (Start/Duration before end of HLD can be programmed) Pre-squeeze time Squeeze time 1st weld time (PreWLD)
Seite 41
R911172804 | PST 6xxx.323 Bosch Rexroth AG 41/44 Timer diagrams Start Program selection Weld on external Pressure output Weld complete contact WC (Start/Duration before end of HLD can be programmed) Pre-squeeze time Squeeze time 1st weld time (PreWLD) 1st cool time...
Seite 42
42/44 Bosch Rexroth AG R911172804 | PST 6xxx.323 Timer diagrams Notes:...
Seite 43
R911172804 | PST 6xxx.323 Bosch Rexroth AG 43/44 Timer diagrams...
Seite 44
The Drive & Control Company Bosch Rexroth AG Electric Drives and Controls P.O. Box 13 57 97803 Lohr, Germany Bgm.-Dr.-Nebel-Str. 2 97816 Lohr, Germany Tel. +49 9352 18 0 +49 9352 18 8400 www.boschrexroth.com/electrics DOK-PS6000-PST6XXX.323-IT04-D0-P...