12. Jib sail rigging
a) Top of sail
1
2
b) Jib boom
1
1. Tie the jib forestay to the pin on the end of the jib boom.
2. Fasten to the sail hook
3. J5 → J6 → tie loose end to eyelet.
- Distance from jib to boom approx.10 mm.
- Slide J5 and J6 to adjust the sail shape if needed.
Note
• Take all the slack out but do not over tighten.
• The mast should point straight up without bending.
1. Attach the "S" hook to the eyelet on the forestay joint.
2. Hook the forestay cord around the "S" hook.
2
3
10 mm
J5
J6
39