c) Mast
M5
1. Assemble the mast: M1 base joint → M2 main boom → M2 long section → M3 forestay joint → M4 top section.
2. Insert the mast into the mast step hole. The forestay and backstay will hold the mast in place.
11. Mainsail rigging
a) Top of sail
Parts needed:
1. Backstay crane
2. mast head swivel
3. mainsail top hook
1
2
3
1
M4
3
2
Attach the rudder and rudder arm set
then tighten screws
ing the included hex key.
• The rudder should be aligned with
the keel.
• Fine tune the alignment later (if
needed).
M3
b) Main sail luff rings
Use 3x main sail luff rings to attach the
mainsail to the mast.
v
4
1
2
and
us-
M2
M1
37