Operation - cecotec Ready Warm 3100 Smart Now Bedienungsanleitung

5. OPERATION

DISPLAY
SYMBOL FUNCTION
L LOW-POWER HEATING (1000 W)
H HIGH-POWER HEATING (2000 W)
ºC
TEMPERATURE SETTING (15
ºC-35 ºC)
TIMER SETTING (POWER ON
AND POWER OFF FROM 1 TO 24
HOURS)
THERMOSTAT
• Select the desired temperature shown on the display.
• When the set temperature is reached, the appliance will turn automatically off.
• When the room temperature falls below the set one, it will turn automatically on in order
to maintain the set temperature.
• The appliance, as long as it is not disconnected, will remember the last set temperature
and will operate according to it.
TIMER
The heater includes an auto-off and auto-on timer function which can be set from 1 to 24
hours.
• When timer mode is selected, the symbol will blink and the display will show the
remaining time on the right side of the display.
SAFETY SYSTEM
The appliance includes an auto-reset thermostat function which automatically turns off the
device when its surface reaches temperatures which exceed the standard safety ones and
turns it on when the surface's temperature is below it.
It also incorporates a disposable thermal fuse to ensure product and personal safety protection
when the appliance overheats.
REMOTE CONTROL
1. While the appliance is off, press the button to activate low-power heating; when the
appliance is on, press it to turn it off.
2. Press the mode button to select or change mode.
3. Press the button to enter the timer mode and use the
ENGLISH
and buttons to select set
READY WARM 3100 SMART NOW 13