Operation; Cleaning And Maintenance; Technical Specifications - cecotec READYWARM 6190 CERAMIC ROTATE SMART Bedienungsanleitung

ENGLISH

3. OPERATION

Plug the device's power cord into an electrical outlet.
Turn on the main switch at the back of the device.
Press the on/off icon on the touch panel to start the heater and press the mode icon to select
the desired mode.
Press once to set low heating mode. The corresponding indicator light will turn on.
Press twice to set the high heating mode. The corresponding indicator light will turn on.
Press the oscillation icon to activate the oscillation function.
Use the temperature + or temperature – buttons to set the desired temperature, from 10 ºC
to 49 ºC. When the set temperature is higher than the room temperature, the appliance will
automatically switch to low heating mode.
Press the timer icon repeatedly to program the heater from 1 to 24 hours. Once the selected
time has elapsed, the device will turn automatically off.
All this actions and settings can be done from the remote control too.

4. CLEANING AND MAINTENANCE

- Disconnect the appliance from the power supply, turn it off and allow it to cool down
before cleaning or storing it.
- Use a soft, damp cloth to clean the device's surface.
- Clean dust from the device's surface and vents regularly.
- Clean and store the device in a safe, dry place if it is not going to be used for a long period
of time.
- Do not immerse heater in water or allow water to drip into the interior of the heater, as this
could create an electric shock hazard.
- Avoid the use of abrasive cleaning agents or scouring pads as these could damage the
product.
- The power cord should not be in contact with sharp edges, and it should not be compressed
by heavy objects. Store the cord in a clean, dry location always away from metal objects.
Always check the plug before use to assure metal items haven't become attached.
- Do not place any heavy items on top of appliance during storage as this may result in
possible damage of appliance.

5. TECHNICAL SPECIFICATIONS

Product: Ready Warm 6190 Ceramic Rotate Smart
Product reference: 05812
Voltage and frequency: 220-240 V ~ 50-60 Hz
34
READYWARM 6190 CERAMIC ROTATE SMART