Product Assembly; Floor Installation; Wall Installation - cecotec Ready Warm 3100 Smart Now Bedienungsanleitung

ENGLISH

4. PRODUCT ASSEMBLY

FLOOR INSTALLATION

1. Place the product upside-down on a soft and stable surface.
2. Place one of the wheel-mounting plates on one side of the product and make sure the
device fits in the gap between both wheels.
3. Use the screw provided to fix the wheel-mounting plate to the heater.
4. Repeat steps 2 and 3 with the other wheel-mounting plate on the other side of the heater.

WALL INSTALLATION

1. Drill 2 holes on the wall, following the below measures:
• Diameter: 8 mm
• Depth: 35 mm
• Distance between both: 120 mm
2. Insert the plastic screw anchors in the drilled holes and insert the screws inside them.
3. Screw them properly and make sure they are well fixed.
4. Place the appliance against the wall so that the screws match the holes on the appliance's
back
8 mm
12 READY WARM 3100 SMART NOW
120 mm